Golf Club Bending Machines

[Bumkerbum]

Thoughts on bending machines - would like to get one that isn't insanely expensive, but at the same time I don't want to cheap out to the point it doesn't do the job. Thoughts on these or any other recommendations?

Golf works value bending machine -- https://www.golfworks.com/value-line-golf-club-bending-machine/p/vam/
Golf works economy bending machine -- https://www.golfworks.com/economy-iron-bending-machine/p/gw0053/

 

[Sto]

As important, is a quality specification gauge. I would rather have a simple bending machine and a good spec gauge than just a good bending machine.. The two go hand in hand for quality work. Bend - measure- bend- measure. Budget for both if you can.

 

[Bumkerbum]

Aww, so you are saying something like this - https://www.golfworks.com/maltby-golf-club-gauge/p/gw1040/ - that you really need to two if you are going to do it properly?

 

[MGoBlue]

Depending on how much you will be using it, the value line bending machine and gauge should be sufficient. If you’ll use it a lot or for other people you should move up to the higher models.

 

[Sto]

Aww, so you are saying something like this - https://www.golfworks.com/maltby-golf-club-gauge/p/gw1040/ - that you really need to two if you are going to do it properly?

Yes- that looks like a great gauge. I would not be unhappy with the value bending devise and that gauge if that is what the budget calls for. https://www.golfworks.com/value-line-golf-club-bending-machine/p/vam/ You will need a bending bar as well- https://www.golfworks.com/non-marring-bending-bar/p/bnmb/ Always check ebay - there is a beautiful spec gauge there now.

 

[ohioglfr]

Mitchell Golf also has a line of bending equipment, for what it's worth.

Mitchell Golf: Loft and Lie Machine | Golf Club Bending Machine

Accuracy with our advanced loft and lie machines from our signature to our Digital TourGauge Machine. Customize clubs to your exact desires and get the winning angle.

www.mitchellgolf.com