RobDMB
Member
Hi,
I had a wood/hybrid fitting yesterday and got the following results:
1) TM M3 8.5 Driver w/ Fujikura Pro 2.0 Tour Spec 7X or Hzrdus T1100 75g 6.5 (it was close between shafts but the fitter overall like the Pro 2.0 for me even if my longer drive was with the T1100) - about 110 mph swing speed and i release hands early (flaw) which causes my dynamic loft to go way up;
2) TM M3 3 Wood w/ Fujikura Pro 2.0 Tour Spec 7X
3) TM M3 Hybrid w/ KBS Tour Hybrid Prototype 95g shaft.
Was wondering what everyones thoughts were on the Fujikura Pro 2.0 shaft compared to the T1100. Don't hear much about the Pro 2.0. Also any thoughts on playing Driver and 3 wood shaft at same weight. There is an 85g Pro 2.0 but I didn't have the chance to hit it - I did hit other shafts in that weight category and the results weren't as well.
Thanks!
I had a wood/hybrid fitting yesterday and got the following results:
1) TM M3 8.5 Driver w/ Fujikura Pro 2.0 Tour Spec 7X or Hzrdus T1100 75g 6.5 (it was close between shafts but the fitter overall like the Pro 2.0 for me even if my longer drive was with the T1100) - about 110 mph swing speed and i release hands early (flaw) which causes my dynamic loft to go way up;
2) TM M3 3 Wood w/ Fujikura Pro 2.0 Tour Spec 7X
3) TM M3 Hybrid w/ KBS Tour Hybrid Prototype 95g shaft.
Was wondering what everyones thoughts were on the Fujikura Pro 2.0 shaft compared to the T1100. Don't hear much about the Pro 2.0. Also any thoughts on playing Driver and 3 wood shaft at same weight. There is an 85g Pro 2.0 but I didn't have the chance to hit it - I did hit other shafts in that weight category and the results weren't as well.
Thanks!